11 Declaration of Incorporation of Partly Completed Machinery
41 of 44
EA-C
11 Declaration of Incorporation of Partly Completed Machinery
Manufacturer:
KSB SE & Co. KGaA
Johann-Klein-Straße 9
67227 Frankenthal (Germany)
The manufacturer herewith declares for the partly completed machinery:
KSB EA-C 20, KSB EA-C 40, KSB EA-C 80, KSB EA-C 140,
KSB EA-C 200, KSB EA-C 250
▪
The following essential requirements of the Machinery Directive 2006/42/EC, Annex I, have been applied and
fulfilled:
– 1.1.2, 1.1.3, 1.1.5
– 1.2.1, 1.2.2, 1.2.6
– 1.3.2, 1.3.4, 1.3.7, 1.3.9
– 1.5.1, 1.5.4, 1.5.5, 1.5.6
– 1.7.1, 1.7.3, 1.7.4
▪
The relevant technical documentation has been compiled in accordance with Part B of Annex VII. This
documentation or parts hereof will be transmitted by post or electronically in response to a reasoned request
by the national authorities.
The partly completed machinery must not be put into service until the final machinery into which it is to be
incorporated has been declared in conformity with the provisions of the Machinery Directive 2006/42/EC, where
appropriate.
Person authorised to compile the technical file:
Dieter Hanewald
Product Management and Product Development II Frankenthal
KSB SE & Co. KGaA
Johann-Klein-Str. 9
67227 Frankenthal (Germany)
The Declaration of Incorporation was issued in/on:
Frankenthal, 1 February 2018
Dieter Hanewald
Product Management and Product Development II Frankenthal
KSB SE & Co. KGaA
Johann-Klein-Straße 9
67227 Frankenthal
Summary of Contents for EA-C
Page 43: ......