5
ENGLISH
SETTING THE CLOCK
Plug your appliance. The display
(8)
will light up to indicate that the clock can be set. The
clock can be adjusted at any time later on.
Fig. 1 and 2.
Repeatedly press the hour button
(4)
to set the hours.
Fig. 2a.
Repeatedly press the minute button
(6)
to set the minutes. The display will light up within
a few seconds and the time will appear on the screen.
Fig. 2b.
NOTE:
You can adjust or change the time. You can adjust the time setting by using the
Hour and Minutes buttons.
USE
The appliance can be used for making coffee with coffee beans or ground coffee. Before first
use, the appliance is set to make coffee with coffee beans. After each use, the appliance will
memorize the last setting used for the next use: making coffee with coffee beans or making
coffee with ground coffee.
The appliance can only be used when the display is activated. If the display is not activated,
press any button to activate the display. The appliance is ready for use.
Before you proceed, we need you to pay attention to the following notes:
Keep your hands, face and other body parts away from the steam hole. The steam from
the appliance becomes very hot during use.
Do not cover the steam hole.
MAKING COFFEE
Making coffee with coffee beans
Before you proceed, we would like you to focus your attention on the following notes:
Only use coffee beans.
Only use paper coffee filters or permanent filter.
Open the lid
(14)
and fill the water reservoir
(15)
with the required amount of water.
Fig. 3 and 4.
Do not fill the water reservoir with more water than required for making the coffee.
Fill the coffee bean compartment
(13)
completely with coffee beans
Fig. 9
.
Close the lid
(14)
.
Set the ground coffee fineness. Refer to the section “Setting the ground coffee fineness”
Fig. 8
.
Press the Release button
(12)
to open the filter holder compartment
Fig. 6
.
Place a suitable paper filter holder or permanent filter in the coffee filter holder
(10)
Fig.
7a or 7b
.
Close the filter holder compartment until the Release button
(12)
clicks into place.
Note:
The appliance can only be used when the display is activated. If the display is not
activated, press any button to activate the display. The appliance is ready for use.
Set the coffee quantity. The coffee quantity selector
(3)
is used for setting the required
coffee quantity. The coffee quantity selector
(3)
can be set to 2, 4, 6, 8 or 10 cups
Fig. 13
.
