6
• DO NOT USE PIPE DOPE AS A SEALANT. All water lines provided with
faucet are compression fittings and do not require sealant. Pipe dope
will damage the valve and filters and will void the warranty.
• DO NOT OVERTIGHTEN.
• YOU MUST FLUSH ALL WATER LINES UNTIL CLEAR BEFORE CONNECTING
TO THE SUPPLY LINES PROVIDED.
• Faucet includes a mechanical mixing valve that must be installed and
adjusted for proper temperature.
• Clean water filter located inside black filter compartment located on the
side of the control unit on a regular basis.
• Install all plumbing and electrical in accordance with national/local codes
and regulations.
• Use precaution when connecting optional AC adapter to power source.
Power
Working Pressure
Temperature Range
Sensing Distance
Response Time
Off Delay Time
Fresh Battery Life Cycle
Low Battery Indicator
Dead Battery Indicator
Control Module
• 8” adjustable wrench
• Basin wrench
• 1/8” Allen wrench
• Pliers
• Slotted and Flat screwdriver
IMPORTANT
TOOLS REQUIRED
SPECIFICATIONS
(4) Alkaline AA Batteries or AC/DC
20 - 125 PSI
40-180 Degrees Fahrenheit
3/4” - 6 1/2” (default 5 1/2”)
0.3 seconds
1 second (default), 10 seconds, 15 seconds (optional)
500,000 on/off
Red LED Flash
Red LED on
15 seconds (default) before automatic shut off,
20, 25, 30 45, 1 minute, 2 minute & 10 minute max.
