10
COLD
HOT
IN
OUT
STEP 2 • Install Mechanical Mixing Valve
Install Mechanical Mixing Valve into inlet location #1 on the Control Module, which has a
compression fitting. Do not use thread sealant and do not overtighten. The Control
Module is to be mounted to a wall and the Mechanical Mixing Valve must be straight
as per photo below. Pick mounting location that will allow the supply lines and cable
to have slack to prevent strain. Mount Control Module on wall using mounting screws
and plastic anchors provided.
Install the spout supply line from supply inlet which has compression fittings, onto the
spout inlet and tighten properly. Do not overtighten. Do not use thread sealant.
Install the sensor cable onto the control unit. It is very important to match up the
white arrows when connecting the sensor cable to the fitting on the control unit.
Gently push it into place as forcing it can damage the pins. Slide chrome cap over
black connector and gently tighten. Do not overtighten.
Remove the 2 small stainless steel screens inside small plastic bag and place one
inside each of the 2 water lines. Connect the compression fitting with the screen
onto the wall supply stops(not included) and do the same for the other water line.
This screen will prevent debris from going inside the control valve. Connect the other
STEP 3 • Install Sensor Cables and Supply Lines
Install the spout water supply line, which has a compression fitting, onto the faucet body and
tighten properly. Do not overtighten. Do not use thread sealant.
On wall mount models you must install brass elbow on spout inlet before installing spout water
supply line. Do not overtighten. Do not use thread sealant.
Feed the sensor cable and supply inlet through the hole & mount faucet body onto surface.
Do not overtighten. Do not use thread sealant.
Sensor Cable
Optional AC
adapter
Optional Thermostatic
Mixing Valve
Mechanical
Mixing Valve
Hot & Cold
Water Lines
INSTALLATION (con’t)
1
2
2
1
4
3
3
4
Spout Supply
Filter
Control Module
Note: Refer to below diagram for step by step installation.
stainless steel screens
