Krone Titan 6/50 GL, Operating Instructions Manual, Page: 98 / 134

VII - 8
Maintenance
7.7 Checking and changing the oil
The oil level in the transmission must be checked
regularly before and after use.
An oil change should be carried out after the first period
of use (approx. 30-50 h). After this, change the oil once a
year. To do this, drain out the old oil from the
transmission and fill it with fresh gear oil SAE 90 APi-GL-
4.
After an oil change, the old oil must be
disposed of in the proper manner.
7.7.2 Scraper-floor drive unit
The scraper-floor drive unit is located at the rear on the
right hand side.
KDW06331
2
1
Oil inspection:
• Remove check screw (1)
• Oil level up to bore hole (1)
• If necessary, top up oil (SAE 90), fit
check screw (1)
Oil change:
• Unscrew the oil draining screw (2)
• Collect the used oil in a suitable collection vessel.
• Fit oil draining screw (2)
• Fill oil (1) (Oil level up to bore hole (1))
KDW06333
7.7.1 Main gearbox
Oil inspection:
• Remove check screw (1)
• Oil level up to bore hole (1)
• If necessary, top up oil (SAE 90), fit
check screw (1)
Oil change:
• Unscrew the oil draining screw (2)
• Collect the used oil in a suitable
collection vessel.
• Fit oil draining screw (2)
• Fill oil (3) (Oil level up to bore hole (1))
• Drive in oil level check screw (1) and breather (3).