Krone Titan 6/50 GL, Operating Instructions Manual, Page: 95 / 134

VII - 5
Maintenance
7.5.1 Adjusting the Sensors
Namur sensor d = 12 mm
The dimension between the encoder (2) and the sensor
(1) must be “a“ = 2 mm.
Setting
• Loosen the nuts on either side of the sensor.
• Turn the nuts until dimension “a” = 2 mm is reached.
• Tighten the nuts again.
Namur sensor d = 30 mm
The dimension between the encoder (2) and the sensor
(1) must be “a” = 5 mm.
Setting
• Loosen the nuts on either side of the sensor.
• Turn the nuts until dimension “a” = 5 mm is reached.
• Tighten the nuts again.
a
BPXC0172
2
1
3
a
BP-VFS-088-1
2
1
3
Reed sensor
The dimension between the encoder (2) and the sensor
(1) must be “a” = 5 mm.
Setting
• Loosen the nuts on either side of the sensor.
• Turn the nuts until dimension “a” = 5 mm is reached.
• Tighten the nuts again.
a
TR000040
2
1
3