Krone Titan 6/50 GL, Operating Instructions Manual, Page: 82 / 134

V - 2
Standard operation
5.3 Control panel
(1) Switch for switching and power supply „ON“ and
„OFF“.
(2) The (green) indicator lamp lights up when (1) is
switched on.
(3) The (red) indicator lamp lights up when the scraper
floor is switched on.
The lamp goes out when the scraper floor is switched
off automatically, i.e. when the wagon is full.
(4) Switch for operating the pick-up
(5) Switch for operating the articulated tow-bar
(6) Switch for hydraulically operating the rear flap (see
also Page III - 14 – Section 3.9.6)
(7) The (red) indicator lamp lights up when rear flap is
open to full extent.
(8) Switch for operating the hydraulic cutters
0 system
(9) The (red) indicator lamp lights up when the cutter 0
circuit is operated or when the cutter unit is not in its
operating position.
(10) Switch for the floodlamp in the storage area.
(11) Switch for changing cutters.
When changing cutters, first switch cutter
unit to Position „Cutters 0“ using Switch
(8) and arrest it. After this, lower
completely with Switch (11)
simultaneously.
(12) The (green) indicator lamp lights up when the
arrest ram for the steering axle (special fitting) is
pressurised and the steering is therefore locked.
(13) Metal retainer bracket for the switch box
(14) Switch for operating the scraper floor (switches
two speeds with fast speed floor conveyor option)
5XLS0001
5
4 10 11
12
13
3
14
6
9 7
8
1 2