Maintenance
80
Pos : 42.28 / BA/ War tung/Sc hwader/Zi nken / Zi nkenarme/Zi nken t aus chen (im Reparat urf all) @ 139\mod_1354699792713_78.doc x @ 1241518 @ 2 @ 1
11.9
Replacing Tines
7
6
5
1
2
3
4
SWN1400036
8
9
Fig. 49
1)
Hex bolt M12 x 110 -10.9
2)
Detent edged washer SKB 12
3)
Washer 13x35x8
4)
Fastening clamp
5)
Support
6)
Washer 13x24x2.5
7)
Locknut M12
8)
Tines
9)
Tine arm
Adhesive (high-strength) (order no. 938 627
0)
•
Remove all tines in front of the broken tine to remove the broken tine.
•
Remove the broken tine.
Installing New Tine
•
Slide fastening clamp onto the tine.
•
Slide tine onto the tine arm.
•
Guide hex bolt with detent edged washer and washer from below through the fastening
clamp and the tine arm.
•
Apply adhesive (high-strength) on the threading overhang of the screw.
•
Install support, washer and locknut, raise tine on the tine end and tighten nut with torque
(85 Nm).
Proceed as described above with all tines.
Pos : 42.29 / BA/---------------Seitenumbr uc h---------------- @ 0\ mod_1196175311226_0.doc x @ 4165 @ @ 1
