Commissioning
37
VP700008_2
2
1
4
3
Fig. 14
4.
Secure bolt with washer (3) and clamping sleeve (4).
5.
Tighten screw connections (1) and (2) of the mounting plates.
VP700026
1
2
3 5
4
4 7
6
6
8
7
8
Fig. 15
6.
Pre-assemble strip (1) with screws (2,3), washers (4,5), springs (6) and nuts (7) right and
left of the bale ejector.
7.
Set the bale ejector down on the machine and install it as described below.
Pos: 13.15 /BA/-----Seitenumbruch------ @ 0\mod_1196175311226_0.doc @ 4165
