Special equipment
87
Pos: 143 /Überschriften/Ü berschriften 1/P-T/Sonderausstattung @ 2\mod_1202808469779_78.docx @ 61649 @ 1 @ 1
17
Special equipment
Pos: 144 /Überschriften/Ü berschriften 2/P-T/SSpezielle Sicherheitshinweise @ 0\mod_1196660495760_78.docx @ 9134 @ 2 @ 1
17.1
Special Safety Instructions
Pos: 145 /BA/Sicherheit/7. Gefahr enhinweise alt/M ähwer ke/War nung - R epar atur _Wartung_R einigungs_4 allgemei n EasyCut @ 292\mod_1410941423112_78.docx @ 2299026 @ @ 1
WARNING!
When performing repair, maintenance or cleaning work or in case of technical
intervention, drive elements may start moving (caution: cutting discs continue to run).
Effect: Danger to life, injuries or damage to the machine.
• Turn off the PTO shaft.
• Move the machine to the working position and lower it to the ground.
• Switch off the engine of the tractor, remove the ignition key and carry it with you.
• Secure the tractor against accidental start-up and against rolling.
• After the repair, maintenance, cleaning work or technical modifications are completed,
mount all protective covers and safety devices properly again.
• Avoid skin contact with oils, greases, cleaning agents and solvents.
• In the event of injuries or burns due to oils, cleaning agents or solvents, contact a physician
immediately.
• All other safety instructions must also be followed to avoid injuries and accidents.
Pos: 146 /BA/Sonderausstatung/EasyC ut / AM M ähwer ke/H ochschnittkufen EasyCut @ 3\mod_1204783761105_78.docx @ 72974 @ 2 @ 1
17.2
Adjusting Skids
Fig. 53
Adjusting skids can be used to increase the cutting height (see chapter entitled "Adjusting the
cutting height")
To do this, insert the adjusting skids (3) into the glide skids (2) and screw them in place. The
adjusting skids must always be mounted underneath the mowing discs that run next to the
mower drum.
Pos: 147 /Layout Module /---------------Seitenumbr uch---------------- @ 0\mod_1196175311226_0.docx @ 4165 @ @ 1
Summary of Contents for EasyCut F 280
Page 95: ......