Operation
51
4
EC903058
Fig. 38
Caution! - Danger of accident and damage!
Place hydraulic hoses (1) and electrical connection line (2,3) on the maize header (4).
Note
Before disconnecting the hydraulic hoses (1), depressurise the system on both sides.
•
Close the shut-off valve (4) on the pendulum frame before removing the hydraulic lines
(1).
•
Disconnect the hydraulic lines (1) at the hydraulic couplings and close off with dust caps.
•
Detach the lighting cable (2).
•
Loosen the connection cable (3) for the sensors.
3
1
1
3
2
4
EC903022
Fig. 39
•
Pull the joint fork (5) off the drive journal (6) of the main angular gearbox.
•
Open the locking hook (1): Disconnect the spring-loaded plug (4), pull the locking lever
(3) from the locking pin (2) and swing it forwards.
•
Lower the pendulum frame of the forage harvester until the receiving claws are below the
holding bolts.
•
Move the forage harvester back.
