Operation
41
7
Operation
7.1
From transport into working position
Danger! - Lowering the machine into working position
Effect: Danger to life, injuries or damage to the machine.
•
Do not lower the machine until you are absolutely sure that neither persons, animals nor
objects are in the swivel range of the machine.
•
Keep persons out of the danger zone. If persons do approach the danger zone, turn off
the machine immediately.
•
Never leave the machine running unsupervised.
•
Check the safety devices each time before the machine is used. Replace damaged
safety devices immediately.
•
Do not work on the front attachment until the engine has been stopped and the ignition
key has been removed. All operating levers should be in the neutral position and no
hydraulic lines should be under pressure.
•
Always check the attachment before use and after driving into an obstacle. Worn,
damaged or deformed blades must be replaced immediately. This also applies to
holders.
•
Do not switch on the drive until the front attachment is in the working position.
7.1.1
Removing the protective cover
Fig. 26
•
Stop the machine
•
Pull off the lighting cables
•
Remove the guards (1,2) from the right and left-hand sides of the machine.
•
Remove the front guard (3).
