Start-up
32
5
Start-up
Danger! - Attaching / removing and operating the machine
Effect: Danger to life or serious injuries.
•
The machine may only be attached to the forage harvester for which it is intended!
•
There must be nobody between the forage harvester and the front attachment.
•
Switch off the engine, remove the ignition key, and secure the forage harvester from
rolling away.
•
Wait until all machine parts have come to a complete stop.
•
Before working under or on the raised front attachment, support the attachment securely.
•
During operation there must be nobody within the danger zone of the machine.
•
The protective equipment on the machine, e.g. cloths and hoods, protects against flying
stones and similar objects, and prevents access to hazardous areas. For this reason you
must always move them to their protective position before starting work.
•
Do not open or remove the safety devices while the engine is running.
•
No one is permitted in the swivel range while the machine is being swivelled from the
transport into the working position or vice versa.
•
Before starting up the machine and while working, bring the machine into the working
position and lower it onto the ground or to the required cutting height.
•
On public highways and roads the EASYCOLLECT 753 and EASYCOLLECT 903 maize
header must always be in the transport position.
•
The EASYCOLLECT 1053 maize header must be placed on a special transportation
trailer for road transport.
