SFP4 interface (eth4)
•
Enable
◦
Check to enable the SFP4 module
◦
Type: On / O
ff
•
IPv4 Addr./Netmask
◦
Enter IPv4 address/mask for the interface. Ignored if DHCP is enabled.
◦
Type: String
•
IPv4 Gateway
◦
Gateway for the interface. Enter an IPv4 address to use as gateway, or leave
blank for no gateway. Ignored if DHCP is enabled.
◦
Type: String
•
IPv6 Addr./Netmask
◦
Enter IPv6 address/mask for the interface. Ignored if DHCP is enabled.
◦
Type: String
•
IPv6 Gateway
◦
Gateway for the interface. Enter an IPv6 address to use as gateway, or leave
blank for no gateway. Ignored if DHCP is enabled.
◦
Type: String
•
Loopback
◦
Only for testing! Check to enable internal and external loopback
◦
Type: On / O
ff
DNS
•
DNS server 1
◦
DNS server 1
◦
Type: String
•
DNS server 2
◦
DNS server 2
◦
Type: String
IEEE 1588
The device supports accurate synchronization of the reference clock using the PTPv2
protocol and the IEEE-1588 standard. Note that the timing master must be reached
through one of the SFP+ interfaces as the management interface does not support
www.kronback.com | [email protected]
NDX Manual - Setup pages
19 of 24
