SFP1 interface (eth1)
•
Enable
◦
Check to enable the SFP1 module
◦
Type: On / O
ff
•
IPv4 Addr./Netmask
◦
Enter IPv4 address/mask for the interface. Ignored if DHCP is enabled.
◦
Type: String
•
IPv4 Gateway
◦
Gateway for the interface. Enter an IPv4 address to use as gateway, or leave
blank for no gateway. Ignored if DHCP is enabled.
◦
Type: String
•
IPv6 Addr./Netmask
◦
Enter IPv6 address/mask for the interface. Ignored if DHCP is enabled.
◦
Type: String
•
IPv6 Gateway
◦
Gateway for the interface. Enter an IPv6 address to use as gateway, or leave
blank for no gateway. Ignored if DHCP is enabled.
◦
Type: String
•
Loopback
◦
Only for testing! Check to enable internal and external loopback
◦
Type: On / O
ff
SFP2 interface (eth2)
•
Enable
◦
Check to enable the SFP2 module
◦
Type: On / O
ff
•
IPv4 Addr./Netmask
◦
Enter IPv4 address/mask for the interface. Ignored if DHCP is enabled.
◦
Type: String
•
IPv4 Gateway
◦
Gateway for the interface. Enter an IPv4 address to use as gateway, or leave
blank for no gateway. Ignored if DHCP is enabled.
◦
Type: String
www.kronback.com | [email protected]
NDX Manual - Setup pages
17 of 24