KROHNE UFC 400, Supplementary Instructions Manual

Page: 51 / 76

OPERATION
4
51
UFC 400
www.krohne.com 12/2015 - 4002813702 - AD FF UFC 400 R02 en
PRIMARY_VALUE_ PRIMARY_VALUE_ PRIMARY_VALUE_ PRIMARY_VALUE_
202
202 202
202
Gain
The measured value and status available to the Function
Block.
-
STATUS
Status
R Digital transducers, unlike their analogue versions, can detect
faults that make the measurement bad or prevent the
actuator from responding. This additional, valuable
information will be passed along with each transmission of a
data value in the form of a status attribute.
-
VALUE
Value
R A numerical quantity entered by a user or calculated by the
algorithm.
-
PRIMARY_VALUE_ PRIMARY_VALUE_ PRIMARY_VALUE_ PRIMARY_VALUE_
RANGE_202 RANGE_202 RANGE_202 RANGE_202
Gain Range
The high and low range limit values, the engineering units
code and the number of digits to the right of the decimal point
to be used to display the Primary Value.
-
EU_100
max value
R The engineering unit value which represents the upper end of
range of the associated Block Parameter.
100.0
EU_0
min value
R The engineering unit value which represents the lower end of
range of the associated Block Parameter.
-0.0
UNITS_INDEX
Units Index
R/W Device Description units code index for the engineering unit
descriptor for the associated block value.
dB
Settings:
dB
DECIMAL
Decimal (Point)
R The number of digits to the right of the decimal point which
should be used by an interface device in displaying the
specified parameter.
2
PRIMARY_VALUE_ PRIMARY_VALUE_ PRIMARY_VALUE_ PRIMARY_VALUE_
203 203 203 203
SNR
The measured value and status available to the Function
Block.
-
STATUS
Status
R Digital transducers, unlike their analogue versions, can detect
faults that make the measurement bad or prevent the
actuator from responding. This additional, valuable
information will be passed along with each transmission of a
data value in the form of a status attribute.
-
VALUE
Value
R A numerical quantity entered by a user or calculated by the
algorithm.
-
PRIMARY_VALUE_
PRIMARY_VALUE_ PRIMARY_VALUE_
PRIMARY_VALUE_
RANGE_203 RANGE_203 RANGE_203 RANGE_203
SNR Range
The high and low range limit values, the engineering units
code and the number of digits to the right of the decimal point
to be used to display the Primary Value.
-
EU_100
max value
R The engineering unit value which represents the upper end of
range of the associated Block Parameter.
100.0
EU_0
min value
R The engineering unit value which represents the lower end of
range of the associated Block Parameter.
-0.0
UNITS_INDEX
Units Index
R/W Device Description units code index for the engineering unit
descriptor for the associated block value.
dB
Settings:
dB
DECIMAL
Decimal (Point)
R The number of digits to the right of the decimal point which
should be used by an interface device in displaying the
specified parameter.
2
PRIMARY_VALUE_
PRIMARY_VALUE_ PRIMARY_VALUE_
PRIMARY_VALUE_
204 204 204 204
Electronic
Temperature
The measured value and status available to the Function
Block.
-
STATUS
Status
R Digital transducers, unlike their analogue versions, can detect
faults that make the measurement bad or prevent the
actuator from responding. This additional, valuable
information will be passed along with each transmission of a
data value in the form of a status attribute.
-
Parameter
Parameter Parameter
Parameter
DD name Access Description and settings Initial Value