KROHNE UFC 400, Supplementary Instructions Manual

Page: 54 / 76

4
OPERATION
54
UFC 400
www.krohne.com 12/2015 - 4002813702 - AD FF UFC 400 R02 en
SENSOR_DSP_ SENSOR_DSP_ SENSOR_DSP_ SENSOR_DSP_
INFO
INFO INFO
INFO
Sensor DSP
Displays information of the sensor DSP software. Displays the
ID of the DSP on the FrontEnd (Fct. B3.4.2, C1.6.2).
-
IDENT_NUMBER
ID-No. Board
R ID No. of the circuit board. -
SOFTWARE_VER
Software version
R Software version -
PRODUCTION_
DATE
Production date
R Production date -
USER_INTERFACE USER_INTERFACE USER_INTERFACE USER_INTERFACE
SW.REV.UIS
Displays information of User Interface (Fct. B3.6). -
IDENT_NUMBER
ID-No. Board
R ID No. of the circuit board. -
SOFTWARE_VER
Software version
R Software version -
PRODUCTION_
DATE
Production date
R Production date -
TRANSDUCER_ TRANSDUCER_ TRANSDUCER_ TRANSDUCER_
DIRECTORY DIRECTORY DIRECTORY DIRECTORY
Transducer
Directory Entry
A directory that specifies the number and starting indices of
the data collections in the transducer block.
0
TRANSDUCER_
TRANSDUCER_ TRANSDUCER_
TRANSDUCER_
TYPE TYPE TYPE TYPE
Transducer Type
R Identifies the transducer that follows. Other
XD_ERROR XD_ERROR XD_ERROR XD_ERROR
Transducer Error
One of the transducer error codes defined in the FF
Transducer Specifications in section "4.7 Block Alarm
Subcodes".
Uninitialized
Settings:
•
16: Unspecified error
•
17: General error
•
18: Calibration error
•
19: Configuration error
•
20: Electronics Failure
•
21: Mechanical Failure
•
22: I/O Failure
•
23: Data Integrity Error
•
24: Software Error
•
25: Algorithm Error
V_NO_SENSOR V_NO_SENSOR V_NO_SENSOR V_NO_SENSOR
V no. sensor
R Displays the order number of the measuring sensor (Fct.
C1.6.6).
Parameter
Parameter Parameter
Parameter
DD name Access Description and settings Initial Value