ELECTRICAL CONNECTIONS
4
17
SMARTPAT COND 1200
www.krohne.com
09/2015 - 4003041501 - MA SMARTPAT COND1200 R01 en
4.5 Connecting the sensor cable
4.6 Connection diagram
DANGER!
All work on the electrical connections may only be carried out with the power disconnected.
INFORMATION!
The cable glands installed by the manufacturer are designed for a cable diameter of 8 to 13 mm.
If you are using cables with a larger diameter, you must replace the manufacturer's cable glands
with suitable ones.
Cable VP2-S
Transparent-Black (inner coax shield)
Ub+
White
Ub-
Shield
S
Figure 4-2: SJB 200 W-Ex with SMARTPAT sensor, integrated HART
®
resistor and without display (left side).
SJB 200 W-Ex with SMARTPAT sensor, integrated HART
®
resistor and display (right side).
SJB 200 W-Ex with SMARTPAT sensor, integrated
HART
®
resistor and without display.
SJB 200 W-Ex with SMARTPAT sensor,
integrated HART
®
resistor and display.
A
(Ub+)
A
(Ub+)
B
Sensor- (Ub-)
B
Sensor- (Ub-)
F
Loop- w/o Display
C
G
Loop+ 250
Ω
D
Display-
E
Loop- w/ Display
G
Loop+ 250
Ω
MA_SMARTPAT_COND_1200_en_150902_4003041501_R01.book Page 17 Monday, September 21, 2015 4:33 PM
