KROHNE OPTISOUND 3010 C, Handbook

Page: 35 / 52

35
6 Set up with the display and adjustment module
OPTISOUND 3010 C • Four-wire 4 … 20 mA/HART
30504-EN-220310
Unit of measurement
m(d)
The sensor is already set to the ordered national language. In this
menu item you can change the language. The following languages are
available as of software version 3.50:
•
Deutsch
•
English
•
Français
•
Espanõl
•
Pycckuu
•
Italiano
•
Netherlands
•
Japanese
•
Chinese
Language
German
The functional safety is already activated Ex factory for instruments
with SIL qualification. For instruments Ex factory without SIL qualifica-
tion, the functional safety must be activated by the user for applica-
tions according to SIL via the indicating and adjustment module. The
SIL factory setting cannot be deactivated by the user.
The activation of SIL has the following impact:
•
In the menu item " Failure mode " under " Current output ", the
parameters " Hold value " and " 20.5 mA " are blocked
•
In the menu item " HART mode ", the function " Multidrop " is
blocked
Note:
For such applications, it is absolutely necessary to take note of "
Safety Manual ".
HART offers standard and multidrop mode.
The mode "standard" with the fixed address 0 means outputting the
measured value as a 4 … 20 mA signal.
In Multidrop mode, up to 15 sensors can be operated on one two-wire
cable. An address between 1 and 15 must be assigned to each sen-
sor.
8)
In this menu item you determine the HART mode and enter the ad-
dress for multidrop.
Service - Language
Service - SIL
Service - HART mode
8)
The 4 … 20 mA signal of the sensor is switched off. The sensor uses a
constant current of 4 mA. The measuring signal is transmitted exclusively as
a digital HART signal.