31
R
Re
eff
D
Diis
sp
plla
ayy
D
De
es
sc
crriip
pttiio
on
n &
& S
Se
ettttiin
ng
gs
s
C
C5
5 II//O
O P
PR
RO
OF
FIIB
BU
US
S ((T
Th
hiis
s ffe
ea
attu
urre
e iis
s a
avva
aiilla
ab
blle
e ffo
orr P
PR
RO
OF
FIIB
BU
US
S d
de
evviic
ce
es
s o
on
nllyy..))
Using the menu functions mentioned below you will be able to control basically the eight analogue input
blocks of this PROFIBUS device. These eight menus are identical so they are grouped together and their
functions are described in one go.
C5.y.1
Measurement
Selects the measurement (channel) for the analogue input block for
the PROFIBUS interface
Mass flow:
Temperature
Density:
Concentration 1:
Concentration 2:
Concentration mass flow 2
Concentration mass flow 1:
Concentration volume flow 1
Concentration volume flow 2
Sensor deviation:
Sensor average:
Drive energy
Tube frequency:
Tube strain
Inner cylinder strain:
Electronics temperature *
Flow velocity
Volume flow
Supply**
* This is the electronic temperature
** This is internal supply voltage for the PROFIBUS
C5.y.2
Time Constant
Time constant for this function block
C5.y.3
Error Behaviour
Defines the behaviour of this function block in case of errors
Hold Value:
last valid OUT value stored will be used as
OUT value
Ignore Error:
OUT has the wrong calculated value and sta-
tus Bad as calculated
Replace Value:
“replacement value” will be used as OUT value
Note:
If you choose “y” = 1 all settings will effect FB 1 (Analog Inp.1)
if you choose “y” = 2 all settings will effect FB 2 (Analog Inp.2)
if you choose “y” = 3 all settings will effect FB 3 (Analog Inp.3)
if you choose “y” = 4 all settings will effect FB 7 (Analog Inp.4)
if you choose “y” = 5 all settings will effect FB 8 (Analog Inp.5)
if you choose “y” = 6 all settings will effect FB 9 (Analog Inp.6)
if you choose “y” = 7 all settings will effect FB 10 (Analog Inp.7)
if you choose “y” = 8 all settings will effect FB 11 (Analog Inp.8)
C
C6
6 -->
> D
De
evviic
ce
e
In this menu all functions are grouped that have no effect on the measurement or any output directly.
C6.3.1
Function
One line
Display shows one line of measurement on
this page
Two lines
Display shows two lines of measurement on
this page
Three lines
Display shows three lines of measurement on
this page
