KROHNE OPTIMASS MFC 300, Handbook

Page: 14 / 40

14
A Quick Setup
R Re eff D Diis sp plla ayy D De es sc crriip pttiio on n & & S Se ettttiin ng gs s
A3 Reset
A3.1 Reset Errors
This menu function can be used to reset all
errors that are not removed automatically
(power fail, counter overflow)
step 1: reset?
N
No o: Exit the function
Y Ye es s Resets the errors and exits the func-
tion.
The following reset menus for the counters (totaliser) are only available, if
the quick access has been activated in the menu setup > device > quick
setup. Each counter (totaliser) can be activated for quick access independently.
A3.2 > FB4 Totaliser 1
(for PROFIBUS Devices) the counter can be
reset to zero in this menu
step 1: reset counter?
no: exits the function without reset
yes: resets the counter and exits the function
A3.3 > FB5 Totaliser 2
for PROFIBUS Devices the counter can be
reset to zero in this menu
step 1: reset counter?
N
No o exits the function without reset
Y Ye es s
resets the counter and exits the func-
tion
A3.4 > FB6 Totaliser 3
(where fitted)
(for PROFIBUS Devices) the counter can be
reset to zero in this menu
step 1: reset counter?
N
No o exits the function without reset
Y Ye es s resets the counter and exits the func-
tion
A4 Station Address
(only for PROFIBUS devices)
A4 -> Station Address
selects the address of the device at the PROFIBUS
DP interface.
Note:
The PROFIBUS address can also be changed using the PROFIBUS service
“set_slave_add”. The input range is 0...125 according to the PROFIBUS spec-
ification. Address 126 is the default address and cannot be set via the
PROFIBUS service “set_slave_add” - use menu instead to reset to default
address.
B Test level
B B3 3 IIn nffo orrm ma attiio on n
B3.5 PROFIBUS
available if there is a PROFIBUS interface in existence; displays the
below mentioned information about the PROFIBUS interface:
KROHNE Ident No.
Software Revision of the PROFIBUS software
Date of Production
2.8 Display Paramters (PROFIBUS)
(MFC300 PROFIBUS RS-485 Interface with PA Profile 3.01)
For a detailed description please see ”MFC 300 (OPTIMASS) Handbook”. Some special settings concerning
the PROFIBUS features easily operated via the local menu are described in the following tables.