1
GENERAL SAFETY INFORMATION
6
OPTIFLEX 2200 C/F
www.krohne.com
03/2019 - 4005066003 - AD NEPSI OPTIFLEX2200 R03 en
1.5 NEPSI nameplates
Signal converter housing (compact and remote (field) versions)
Figure 1-1: Nameplate on the signal converter housing (compact and remote (field) versions)
–
Chinese text for devices
made in China
Figure 1-2: Nameplate on the signal converter housing (compact and remote (field) versions)
–
English text for devices
made outside of China
1
Approval logo
2
NEPSI certification agency code
3
Types of device protection including approved Gas Groups and temperature classes (T6...T3 or T2
–
depends on the
probe type), equipment protection level, Dust Zones (certification agrees with test method "A"), maximum surface
temperature and degree of ingress protection (if fitted with the appropriate cable glands)
4
4...20 mA passive
4...20 mA passive
4...20 mA passive
4...20 mA passive
–
HART output option (Ex ia approvals):
HART output option (Ex ia approvals):
HART output option (Ex ia approvals):
HART output option (Ex ia approvals): Intrinsically-safe circuit data
4...20 mA passive
4...20 mA passive
4...20 mA passive
4...20 mA passive
–
HART output option (Ex d ia approvals):
HART output option (Ex d ia approvals):
HART output option (Ex d ia approvals):
HART output option (Ex d ia approvals): Maximum voltage in accordance with GB 3836.1. Refer to
6
for the input voltage range. Minimum waiting time after power-off before it is safe to open the terminal compart-
ment.
Fieldbus (FF or PROFIBUS PA) options:
Fieldbus (FF or PROFIBUS PA) options:
Fieldbus (FF or PROFIBUS PA) options:
Fieldbus (FF or PROFIBUS PA) options: Entity or FISCO power supply parameters
5
Text: For ambient temperature data, please refer to the installation and operating manual
6
Cable entry type and size (M20×1.5 or
½
NPT)
7
Input voltage range and maximum current (4...20 mA passive
–
HART) / basic current (FF or PROFIBUS PA)
8
Type code
–
for more data, refer to "Order code" in the handbook
