59
6.7
Setting the frequency/pulse output (Fct. 3.4. and 1.4)
The frequency/pulse output allows the transfer of one of the following measurement values :
VALUE
OUTPUT TYPE
Mass Total
Pulse
Mass Flow Rate
Frequency
Density
Frequency
Temperature
Frequency
Volume Total
Pulse
Volume Flow Rate
Frequency
Flow Direction
Binary 0 or V+
For systems with the Concentration option, the following functions are also available:
VALUE
OUTPUT TYPE
Concentration by mass / Brix
Frequency
Concentration by volume
Frequency
Solute flow / Brix rate
Frequency
Solute Total
Pulse
The exact programming of this output depends on the measurement value selected.
Pulse Outputs:
When the pulse output (Fct. 1.4.1 or 3.4.1) is set to either MASS TOTAL, VOL.TOTAL OR
SOL.TOTAL (Concentration systems only) then the following sub menus are available:
Fct. 3.4.1
FUNCTION P
Fct. 3.4.2
PULSE/MASS
( or
PULSE/VOL. )
Fct. 3.4.3
PULSE.WIDTH
