KROHNE ALTOSONIC UFM 610 P Installation And Operating Instructions Manual Download Page 61 | Manualshive

Page: 61 / 61

background image

61

IF YOU NEED TO RETURN FLOWMETERS FOR TESTING OR REPAIR TO KROHNE,

PLEASE OBSERVE FOLLOWING:

Your ultrasonic flowmeter has been supplied by a company
with ISO 9001 certification

If installed and operated in accordance with the operating
instructions, your flowmeter will rarely present any
problems.

Should you nevertheless need to return a flowmeter for
checkout or repair, please pay strict attention to the following
points:

Due to statutory regulations concerning protection of the
environment and the health and safety of our personnel,
KROHNE may only handle, test and repair returned
flowmeters that have been in contact with liquids if it is
possible to do so without risk to personnel and environment.
This means that KROHNE can only service your flowmeter

if it is accompanied by a certificate in line with the following
model confirming that the flowmeter is safe to handle.
If the flowmeter has been operated with toxic, caustic,
flammable or water-endangering liquids, you are kindly
requested

to check and ensure, if necessary by rinsing or
neutralizing, that all cavities in the flowmeter are free
from such dangerous substances. (Directions on how you
can find out whether the primary head has to be opened
and then flushed out or neutralized are obtainable from
KROHNE on request.)

to enclose a certificate with the flowmeter confirming
that the flowmeter is safe to handle and stating the liquid
used.

KROHNE regret that they cannot service your flowmeter
unless accompanied by such a certificate.

SPECIMEN certificate

Company

: ………………………………………..

Address

: ………………………………………..

Department

: ………………………………………..

Name

: ………………………………………..

Tel. No.

: ………………………………………..

The enclosed ultrasonic flowmeter

Type

: ………………………………………..

KROHNE order No. or Series No.

: …………………………

has been operated with the following liquid

: ……………………………………………………………………………..

Because this liquid is

water-endangering* / toxic* / caustic* / flammable*

we have
-

checked that all cavities in the flowmeter are free from such substances*

-

flushed out and neutralized all cavities in the flowmeter*

(* delete if not applicable)

We confirm that there is no risk to man or environment through any residual liquid contained in this flowmeter

Date

: ………………………………………..

Signature

: ………………………………………..

Company stamp:

«
...
59
60
61

Summary of Contents for ALTOSONIC UFM 610 P






























































Reviews:

No comments

Related manuals for ALTOSONIC UFM 610 P

Brand: Eaton Pages: 87

Brand: Eaton Pages: 16

Brand: Waltron Pages: 11

Brand: Labom Pages: 6

Brand: Labom Pages: 5

Brand: K-Patents Pages: 10

Brand: NARDA Pages: 64

Brand: Qu-Bit Electronix Pages: 10

Brand: KROHNE Pages: 56

Brand: Eno Scientific Pages: 47

Brand: Vanguard Instruments Company Pages: 111

Solar Auxiliary Power Unit

Brand: J-TECH Pages: 6

Brand: Lumel Pages: 32

Brand: E+E Elektronik Pages: 48

Brand: Tohnichi Pages: 12

Brand: Omega Engineering Pages: 42

Brand: Caird Technology Pages: 29

Brand: BRUEL & KJAER Pages: 26

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands