6
Place two strips 61 into the upper cut outs
of bulkheads 6, 7 and 27.
Now place the roof bars from downside and glue
them to the strips.
Important:
Don´t glue to the bulkheads or cabin sides.
These parts need to be removable.
After the roof construction is dry, take it out and
place the roof with glue well centred on the
construction. Fix with clamps.
Check that the roof does not twist.
File round the two handles 66 and glue them
vertically into the cut outs of the roof.
Glue the mast 70 into the mast base
69
.
Glue the lamp support 71 from front into the cut
out in the mast.
Paint the mast and glue it onto the roof.
Build left and right lamp boards.
Paint the lamp boards black inside.
Glue them onto the front of the roof as shown.
If
you like to use lights or LED's for lighting of
your model, drill 2mm holes through the roof for
the cables.
Glue the lower hatch frame 72 onto the roof with
its rear edge flush with the rear edge of the roof.
Place hatch 74 between and glue the upper
frame 73 on top.
Paint the roof in the colour you wish.
66
68
67
71
69
70
73
74
72
80
81
78
79
76
75
84
82
