RC-5 Control
RC-5 Control
RC-5 Code Set
Preparing for RC-5 Connectivity
The Evolution 707 can be controlled using RC-5 remote control communication protocol. All of
the remote control functions as well as the majority of internal functions can be accessed via RC-5
communication. The Evolution 707 is designed to receive un-modulated data only. The input does
supply power(+5v) to be used with several IR receiving devices.
NOTE:
When the RC-5 IR receiver port is in use, the front panel IR receiver is disabled.
Settings
Settings will vary for different remote devices, the table below describes code sets commenly used
for popular remote control systems.
RC-5 Cable Pin-out
A stereo tip, ring, sleeve 1/8” mini connector is used in the following confi guration:
Tip = RC-5 data, Ring = +5 V, Sleeve = GND.
1.
2.
3.
