Getting Started
UNPACKING AND PLACEMENT
The Evolution 707 is a precision instrument and should be handled with the utmost care when deciding where
it is to be placed and while it is being unpacked and fi nally installed. Because of its physical size and weight, it is
recommended that two people unpack and place the unit. Makes sure the installation location is dry and level,
and able to provide adequate ventilation. The Evolution 707 runs warm to the touch and requires the bottom
and top of the unit be free from obstruction with good circulation of air. Allow a minimum of 3 inches above the
unit for proper ventilation. Additional ventilation may be required when the unit occupies the same space with
other electronics that generate heat like power amplifi ers. Please consult an authorized KRELL dealer or KRELL
industries to insure proper installation guidelines.
Accessories included
1 AC Power cord
1 Handheld Remote control
1 Trigger cable
1 Owner’s reference
1 Quick start guide
1 Warranty registration card
2 AAA Batteries
1 T-10 torx wrench
AC Power Guidelines
The Evolution 707 is designed to work all over the world. The operating voltage is determined at the factory and
is specifi cally set to operate in the country of fi nal destination. The Evolution 707 requires good clean power and
doesn’t require additional fi ltration. Make sure the AC line voltage is within plus or minus 10% of the specifi ed AC
line voltage setting for proper operation.
NOTE:
The Evolution 707 may not operate correctly when AC regeneration or voltage conversion devices are
utilized.
1.
A.
B.
C.
D.
E.
F.
G.
H.
