CAUTION!
Risk of injury due to sharp edges!
Sharp edges and pointed corners can cause abrasions and cuts on the skin.
Note:
–
Proceed cautiously when working on or near sharp edges and pointed corners.
–
Wear protective gloves, if in doubt.
5.2 General installation information
Adhere to the following general information for the installation:
n
Only carry out the installation and start-up in accordance with the steps described in these
operating instructions.
n
Ensure that the utilised hose lines meet the requirements for pressure, chemical and mechan-
ical loads.
n
Only operate the diaphragm pump after fastening it properly to a suitable supporting structure.
n
Install the diaphragm pump vertically and with the fluid intake connection pointing down.
n
Vibrations may occur on the diaphragm pump during operation. Ensure sufficient fastening.
n
Make sure that the connected compressed air is oil-free and free of solid matter.
n
Operate the diaphragm pump with processed, dried compressed air (air quality pursuant to
DIN ISO 8573-1: quality class 4).
n
Never point the compressed air at living beings.
Diaphragm pump MP-520
ENGLISH
Article No. 200-0216, 200-0330
GB–17
