Connection
Fig. 5: Connection
1.
Connect the material intake hose to the material intake connection ( Fig. 5/3).
2.
Connect the compressed-air supply to the compressed-air connection point ( Fig. 5/4).
The compressed air supply must be dry, free of oil and secured by a pressure relief
valve.
3.
Connect the material pressure hose to the material pressure connection (material outlet) (
Fig. 5/2 or 5).
NOTICE!
If necessary, properly close the fluid pressure connection that is not needed.
4.
If necessary, connect the surge tank to the connection ( Fig. 5/1).
5.
Check all connections for a tight fit.
Operating instructions
T-Dok-397-GB-Rev.2
[email protected], www.krautzberger.com
GB–20
