Krautzberger 200-0415, Operating Instructions Manual

Page: 39 / 53

9 Troubleshooting
Personnel:
n Qualified personnel
If the fault is not included in the following tables or if it cannot be eliminated with the measures
described, contact Krautzberger Customer Care.
Troubleshooting table
Spray pattern Error Cause Remedy
Normal flat jet spray pattern
Spray pattern too
heavy towards the top
and towards the
bottom n Dirty air nozzle
n Dirty material
nozzle
Clean the nozzles (
Ä Chapter 8.4 ‘Cleaning the
hand-held spray gun’
on page 29
).
Spray pattern concen-
trated on the left or
right side n Dirty air nozzle
n Dirty material
nozzle
Clean the nozzles (
Ä Chapter 8.4 ‘Cleaning the
hand-held spray gun’
on page 29
).
Heavy application in
the centre of the spray
pattern n Too much material n Reduce material supply
n Material too thick n Thin material
Split spray pattern n Insufficient mate-
rial n Increase the material
supply
n Flat jet air pres-
sure too high n Reduce the flat jet air
pressure
Hand-held Spray Gun HS 30
ENGLISH
200-0415 ￭ 200-0416 ￭ 200-0417 ￭ 200-0418 GB–39