6 Installation
6.1 Safety
Personnel:
n
Specialised personnel
Protective equipment:
The selection of the protective equipment depends on the installation conditions on site. Always
observe the applicable country-specific safety, accident prevention, occupational safety, and envi-
ronmental protection regulations for the proper selection of the protective equipment.
WARNING!
Risk of injury due to improper installation!
Improper installation may cause serious personal injury or material damage.
Note:
–
Ensure ample of space for the installation prior to starting any work.
–
Carefully handle open, sharp-edged components.
–
Maintain order and cleanliness at the installation site. Components that are loosely
stacked or are scattered around can cause accidents.
–
Assemble components properly. Adhere to specified screw tightening torque.
–
Secure components against tipping or falling.
–
Ensure that the utilised hose lines meet the requirements for pressure, chemical and
mechanical loads. At the same time, adhere to the spray media manufacturer's specifica-
tions in the safety data sheet.
WARNING!
Vibrations caused by pulsation-generating compressor units!
Vibrations caused by pulsation-generating compressor units (pumps, compressors) can be
transferred to the spray gun via hose lines and lead to neurological or vascular disorders.
Note:
–
Take breaks between spray processes.
–
Use pulsation-dampening devices (pressure compensation container, etc.).
Hand-held Spray Gun HS 30
ENGLISH
200-0415
￭
200-0416
￭
200-0417
￭
200-0418
GB–17
Summary of Contents for 200-0415
Page 52: ......
