Remove the seals from the main element
Fig. 14: Pull lever
1.
Unscrew the lever screw ( Fig. 141).
2.
Remove the lever axle ( Fig. 14/2) and pull lever ( Fig. 14/3).
3.
Chapter 8.6 ‘Changing the material needle’ on page 33
).
Fig. 15: Seal nut/screw
4.
Remove the actuator ( Fig. 15/2).
5.
Unscrew the seal nut ( Fig. 15/1) and seal screw ( Fig. 15/3).
Fig. 16: Cone seals
6.
Remove the cone seals ( Fig. 16/1 and 2).
Operating instructions
T-Dok-692-GB-Rev.0
[email protected], www.krautzberger.com
GB–36
Summary of Contents for 200-0415
Page 52: ......
