VS-62DT - Kramer Protocol 3000 Commands
59
15.3 Switching/Routing Commands
Note
: Use the
ROUTE
command in preference to legacy AUD, VID, and AV
commands (see below).
Command
Description
Type
Permission
MTX-MODE
Set/get auto-switch mode
Switching
End User
ROUTE
Set/get layer routing
Routing
End User
VID
Set/get video switch state
Switching
End User
15.3.1 MTX-MODE
Command Name
Permission
Transparency
Set:
MTX-MODE
End User
Public
Get:
MTX-MODE?
End User
Public
Description
Syntax
Set:
Set auto-switch mode
#MTX-MODE
␠
output_id,mode
␍
Get :
Get auto-switch mode
#MTX-MODE?
␠
output_id
␍
Response
~nn@MTX-MODE
␠
output_id,mode
␍
Parameters
output_id
–
1 (HDBT), 2 (HDMI)
mode
-
0
(manual),
1
(auto priority),
2
(auto last connected)
Response Triggers
After execution, a response is sent to the comm port from which the Set/Get was received
After execution, a response is sent to all comm ports if MTX-MODE was set by any other external control
device (button press, WEB, device menu and similar)
Notes
Not recommended for new devices
K-Config Example
Set the auto switch mode of HDMI Out to last connected input:
“#MTX-MODE 1,2”,0x0D