8
VS-62DT - Connecting the VS-62DT 6x2 UHD Matrix Switcher
5
Connecting the VS-62DT 6x2 UHD Matrix
Switcher
Always switch off the power to each device before connecting it to
your
VS-62DT
. After connecting your
VS-62DT
, connect its power
and then switch on the power to each device.
You do not have to connect all the inputs and outputs, connect only
those that are required.
To connect the
VS-62DT
, do the following:
1. Connect up to six HDMI sources, (for example, a laptop, Blu-ray player,
SID-X3N
or
DIP-31
) to the HDMI In connectors.
2. Connect the HDBT OUT1 connector to an HDBT acceptor, (for example, an
HDBT projector).
3. Connect the HDMI OUT2 connector to an HDMI acceptors, (for example, 2K
or 4K display).
4. Connect the two balanced AUDIO OUT 5-pin terminal block connectors to up
to two analog audio acceptors, (for example, audio amplifiers).
5. If required, connect a PC/controller to the RS-232 port (see
and/or the Ethernet port (see
6. If required for remote switching, connect up to 6 contact closure switches per
channel to their INPUT TO OUT terminal block connectors.
7. Connect the 48V DC power supply to the device and plug it into the mains
electricity (not shown in
8. If required, acquire the EDID (see