![background image](http://html.mh-extra.com/html/kramer/vs-62dt/vs-62dt_user-manual_2001391022.webp)
VS-62DT - Principles of Operation
15
6.3
EDID Operation
The
VS-62DT
has a default EDID (see
Section 13
) stored on all inputs. This EDID
can be exchanged for either:
•
A custom EDID which is uploaded to one or more inputs using Protocol 3000
commands (see
Section 14
–OR–
•
The EDID of a display device connected to an output by using either the front
panel buttons (see
Section 3
), a Protocol 3000 command, or the Web pages
The EDID is non-volatile and the last valid EDID is used when the device is
powered up.
6.4
Step-in Functionality
The
VS-62DT
can function as a step-in switcher when connected to a suitable
HDMI transmitter, (for example, the
SID-X3N
), using the correct HDMI cable with
HEC support.
Use the Web pages (see
Section 9.2.2
) to assign remote device button actions. The
default button actions are shown in the following table. Up to three buttons can be
active at the same time.
Command
Action
Echo
Allows a connected controller to be programmed to perform a variety
of tasks triggered by the user buttons, such as, room control, (lights,
screen, and so on)
Out1
Step in current input to Output 1
Out2
Step in current input to Output 2