VS-62DT - Kramer Protocol 3000 Commands
67
15.5 EDID Handling Commands
Command
Description
Type
Permission
CPEDID
Copy EDID data from the output to the
input EEPROM
EDID Handling
End User
15.5.1 CPEDID
Command Name
Permission
Transparency
Set:
CPEDID
End User
Public
Get: -
-
-
Description
Syntax
Set: Copy EDID data from the
output to the input EEPROM
#CPEDID
␠
src_type,src_id,dst_type,dest_bitmap
␍
or
#CPEDID
␠
src_type,src_id,dst_type,dest_bitmap,
safe_mode
␍
Get: -
-
Response
~nn@CPEDID
␠
src_stg,src_id,dst_type,dest_bitmap
␍␊
~nn@CPEDID
␠
src_stg,src_id,st_type,dest_bitmap,safe_mode
␍␊
Parameters
src_type
- EDID
source type (usually input): 0 (input), 1 (output), 2 (default EDID), 3 (custom EDID)
src_id
- number of chosen source stage (1.. max number of inputs/outputs)
dst_type
- EDID destination
type (usually input): 0 (input), 1 (output), 2 (default EDID), 3 (custom EDID)
dest_bitmap
- bitmap representing destination IDs. Format: XXXX…X, where X is hex digit. The binary
form of every hex digit represents corresponding destinations. Setting ‘1’ says that EDID data has to be
copied to this destination
safe_mode
-
0
- device accepts the EDID as is without trying to adjust
1
- device tries to adjust the EDID (default value if no parameter is sent)
Response Triggers
Response is sent to the comm port from which the Set was received (before execution)
Notes
Destination bitmap size depends on device properties (for 64 inputs it is a 64-bit word)
Example: bitmap 0x0013 means inputs 1,2 and 5 are loaded with the new EDID
In certain products
Safe_mode
is an optional parameter. See the HELP command for its availability
K-Config Example
Copy the EDID data from the HDMI Out output (EDID source) to the HDMI In 1 input:
“#CPEDID 1,1,0,0x1”,0x0D
Copy the EDID data from the default EDID source to HDMI In 1 and PC In inputs:
“#CPEDID 2,0,0,0x5”,0x0D
