![background image](http://html.mh-extra.com/html/kramer/vs-62dt/vs-62dt_user-manual_2001391062.webp)
VS-62DT - Kramer Protocol 3000 Commands
55
15.2.4 HDCP-STAT?
Command Name
Permission
Transparency
Set:
-
-
-
Get:
HDCP-STAT?
End User
Public
Description
Syntax
Set:
None
-
Get:
Get HDCP signal status
#HDCP-STAT?
␠
stage,stage_id
␍
Response
Set / Get:
~nn@HDCP-STAT
␠
stage,stage_id,status
␍␊
Parameters
stage
–
0
(input),
1
(output),
2
(reserved),
3
(reserved)
stage_id
– Inputs:
1
(Input 1)…
6
(Input 6), Outputs 1 (HDBT), 2 (HDMI)
status
-
signal encryption status –
0
(HDCP off),
1
(HDCP on)
Response Triggers
Response is sent to the comm port from which the Set (before execution) / Get command was received
Response is sent to all comm ports after execution if HDCP-STAT was set by any other external control
device (button press, device menu and similar) or HDCP mode changed
Notes
On output – sink status
On input – signal status
K-Config Example
Get the HDCP input signal status of the source device connected to HDMI In 1:
“#HDCP-STAT? 0,1”,0x0D