![background image](http://html.mh-extra.com/html/kramer/vs-48hdxl/vs-48hdxl_user-manual_2001376009.webp)
KRAMER: SIMPLE CREATIVE TECHNOLOGY
Your VS-48HDxl 3G HD/SD SDI 4x8 Matrix Switcher
6
Table 1: Front Panel VS-48HDxl 3G HD/SD SDI 4x8 Matrix Switcher
#
Feature
Function
1
IR Receiver
The red LED is illuminated when receiving signals from the Infrared
remote control transmitter
2
POWER
Switch
Illuminated switch for turning the unit ON or OFF
3
OUTPUT
(DUAL LINK)
Selector
Buttons
Select the output to which the input is switched (from 1 to 8)
In the dual-link mode, select the output DUAL LINK 1 to DUAL LINK 4
to which the input is switched
4
INPUT
(DUAL LINK)
Selector
Buttons
Select the input to switch to the output (from 1 to 4)
In the dual-link mode, select input DUAL LINK 1 or DUAL LINK 2 to
switch to the outputs
Press IN buttons 1, 2 and 3 simultaneously to reset the machine to its
factory default values
1
(see section 6.6)
Use to set the resolution when switching genlocked video signals (see
section 6.7)
5
STO
(STORE) Button
Pressing STO followed by an INPUT / OUTPUT button stores the
current setting
2
6
TAKE
Button
Pressing
TAKE
toggles the mode between the
CONFIRM
mode
3
and
the
AT ONCE
mode (user confirmation per action is unnecessary).
When in CONFIRM mode, the TAKE button implements a pending
operation
4
7
ALL
Button
Pressing
ALL
followed by an
INPUT
button, connects that input to all
outputs
5
8
RCL
(
RECALL
) Button
Pressing the
RCL
button and the corresponding INPUT / OUTPUT key
displays a setup from the non-volatile memory. After pressing the same
memory location the second time, the settings will take effect
9
OFF
Button
An
OFF
-
OUT
combination disconnects that output from the inputs; an
OFF
-
ALL
combination disconnects all the outputs
Press and hold
6
to toggle between the 4x switcher mode and the
dual-link 2x4 switcher mode
10
LOCK
Button
Disengages/engages the front panel buttons
11 7-segment
Display
Displays the selected input switched to the output (marked above each
input)
1 The 7-segment display shows 12341234, indicating that the operation mode is normal, and that the setups stored via the
INPUT/OUTPUT buttons have been erased
2 For example, press STO and then the Output button # 3 to store in Setup # 3
3 When in Confirm mode, the TAKE button illuminates
4 See section 7.2
5 For example, press ALL and then Input button # 2 to connect input # 2 to all the outputs
6 For more than 3 seconds
im Vertrieb von CAMBOARD Electronics
www.camboard.de
Tel. 07131 911201
Fax 07131 911203