Connecting the VS-48HDxl 3G HD/SD SDI 4x8 Matrix Switcher
13
Figure 3: Connecting the Dual-Link VS-48HDxl 3G HD/SD-SDI 4x8 Matrix Switcher
6.2 Working Mode Setting
You can set the
VS-48HDxl
to work in the dual-link mode as follows:
To switch to the dual-link mode, press and hold the OFF front panel
button for 3 seconds until a red dot illuminates on the display (on the
fourth segment of the 7-segment display) and the OFF button blinks
To exit the dual-link mode, press and hold the OFF front panel button for
3 seconds until the red dot on the display disappears and the OFF button
blinks
im Vertrieb von CAMBOARD Electronics
www.camboard.de
Tel. 07131 911201
Fax 07131 911203