![background image](http://html.mh-extra.com/html/kramer/vs-48hdxl/vs-48hdxl_user-manual_2001376018.webp)
Connecting the VS-48HDxl 3G HD/SD SDI 4x8 Matrix Switcher
15
6.4 Controlling via RS-232 (for example, using a PC)
To connect a PC to the
VS-48HDxl
unit, using the Null-modem adapter
provided with the machine (recommended):
Connect the RS-232 9-pin D-sub rear panel port on the
VS-48HDxl
unit to
the Null-modem adapter and connect the Null-modem adapter with a
9-wire flat cable to the RS-232 9-pin D-sub port on your PC
To connect a PC to the
VS-48HDxl
unit, without using a Null-modem
adapter:
Connect the RS-232 9-pin D-sub port on your PC to the RS-232 9-pin
D-sub rear panel port on the
VS-48HDxl
unit, as Figure 5 illustrates
9-pin D-sub
(From PC)
9-pin D-sub
(Male)
If a shielded cable is used, connect the shield to PIN 5
PIN 4 is connected to PIN 6
PINs 8, 7, 1 are connected together
PIN 5 Connected to PIN 5 (Ground)
PIN 3 Connected to PIN 2
PIN 2 Connected to PIN 3
Figure 5: Connecting a PC without using a Null-modem Adapter
im Vertrieb von CAMBOARD Electronics
www.camboard.de
Tel. 07131 911201
Fax 07131 911203