![background image](http://html.mh-extra.com/html/kramer/vs-48hdxl/vs-48hdxl_user-manual_2001376019.webp)
KRAMER: SIMPLE CREATIVE TECHNOLOGY
Connecting the VS-48HDxl 3G HD/SD SDI 4x8 Matrix Switcher
16
6.5 Controlling via the RS-485 Port
To cascade up to eight individual
VS-48HDxl
units, via RS-485 (with control
via a Master Programmable Remote Control system such as the Kramer
RC-3000
), as
Figure 6
illustrates, do the following:
1. Connect the “A” (+) and “B” (-) PINS on the RS-485 terminal block port of
the
RC-3000
to the “A” (+) and “B” (-) PINS, respectively, on each of the
eight
VS-48HDxl
units. (If using shielded twisted pair cable, the shield is
usually connected to the “G” (Ground) PIN of the first unit).
2. Set the first
VS-48HDxl
unit as MACHINE # 1 and the following seven
VS-48HDxl
units as MACHINE # 2 to MACHINE # 8, according to
Table 3
.
MACHINE # 1
MACHINE # 8
KEYBOARD EXTENSION
REMOTE CONTACT
RS-485
RS-232 IN
RS-232 OUT
12 VDC
1 2
1 2 3 4 5 6 7 8 G
4
6
8
10
3
5
7
9
11 12
14
16
O
U
T
13
15
IN
RS-485 PINOUT
B
G
A
_
+
Figure 6: Controlling via RS-485 (for example, using an RC-3000)
6.6 Factory Reset
Press and hold the input buttons 1, 2 and 3 simultaneously for 3 seconds until
the three buttons flash to reset the machine to its default values.
im Vertrieb von CAMBOARD Electronics
www.camboard.de
Tel. 07131 911201
Fax 07131 911203