Operating the VS-48HDxl
23
7.3.2 Recalling an Input/Output Configuration
To recall an input/output configuration, do the following:
1. Press the RCL button.
The RCL button illuminates.
2. Press the appropriate INPUT / OUTPUT button (the button # corresponding
to the setup #). That setup configuration blinks in the 7-segment
display.
The memory recalls the stored data from that reference
1
.
After pressing the same memory location the second time, the settings take
effect.
To cancel this action, press the RCL button once again
7.4 Locking the Front Panel
To prevent changing the settings accidentally or tampering with the unit via
the front panel buttons, lock
2
your
VS-48HDxl
. Unlocking releases the
protection mechanism.
To lock the
VS-48HDxl
:
Press the LOCK button until the LOCK button illuminates
The front panel is locked. Pressing a button will have no effect
To unlock the
VS-48HDxl
:
Press the illuminated LOCK button until the LOCK button is no longer
illuminated
The front panel unlocks
1 The setup configuration is shown flashing in the 7-segment display, but it is not implemented at this stage
2 Nevertheless, even though the front panel is locked you can still operate via RS-232 or RS-485, as well as via the Kramer
IR Remote Control Transmitter
im Vertrieb von CAMBOARD Electronics
www.camboard.de
Tel. 07131 911201
Fax 07131 911203