![background image](http://html.mh-extra.com/html/kramer/vs-44hdcp/vs-44hdcp_user-manual_2001359012.webp)
VS-44HDCP - Connecting the VS-44HDCP
9
9
5
Connecting the VS-44HDCP
Always switch off the power to each device before connecting it to your
VS-44HDCP
. After connecting your
VS-44HDCP
, connect its power
and then switch on the power to each device.
To connect the VS-44HDCP as illustrated in the example in
Figure 3
:
1. Connect up to four DVI sources (for example, DVD players and/or Blu-ray
disc players) to the IN DVI connectors.
2. Connect the OUT DVI connectors to up to four DVI acceptors (for example,
DVI and/or LCD displays).
3. If required, connect a PC and/or controller to the RS-232 port (see
Section
7.1
) and/or the Ethernet port (see
Section
7.2
).
4. Connect the power cord (not shown in
Figure 3
).
5. Power the device.
6. If required, acquire the EDID (see
Section
6.8
).
i
Summary of Contents for VS-44HDCP
Page 2: ......
Page 13: ...10 VS 44HDCP Connecting the VS 44HDCP Figure 3 Connecting to the VS 44HDCP Rear Panel ...
Page 48: ......