![background image](http://html.mh-extra.com/html/kramer/vs-44hdcp/vs-44hdcp_user-manual_2001359027.webp)
24
VS-44HDCP - Protocol 3000
11
Protocol 3000
By default, the
VS-44HDCP
is set to Protocol 2000 (see
Section
12)
but is also
compatible with Kramer’s protocol 3000 (see
Section
11
).
Note that the
VS-44HDCP
needs to be set to protocol 2000 in order to
use the IR remote control.
Section
9
describes how to switch between protocol 3000 and protocol 2000.
The
VS-44HDCP
can be operated using serial commands from a PC, remote
controller or touch screen using the Kramer Protocol 3000.
This section describes:
Kramer Protocol 3000 syntax (see
Section
11.1
)
Kramer Protocol 3000 commands (see
Section
11.2
)
11.1
Kramer Protocol 3000 Syntax
11.1.1
Host Message Format
Start
Address (optional)
Body
Delimiter
#
device_id
@
Message
CR
11.1.1.1 Simple Command
Command string with only one command without addressing:
Start
Body
Delimiter
#
Command
SP
Parameter_1,Parameter_2,…
CR
11.1.1.2 Command String
Formal syntax with commands concatenation and addressing:
Start
Address
Body
Delimiter
#
device_id
@
Command_1
Parameter1_1,Parameter1_2,…|
Command_2
Parameter2_1,Parameter2_2,…|
Command_3
Parameter3_1,Parameter3_2,…
|…
CR
i
Summary of Contents for VS-44HDCP
Page 2: ......
Page 13: ...10 VS 44HDCP Connecting the VS 44HDCP Figure 3 Connecting to the VS 44HDCP Rear Panel ...
Page 48: ......