![background image](http://html.mh-extra.com/html/kramer/vs-44hdcp/vs-44hdcp_user-manual_2001359022.webp)
VS-44HDCP - Controlling the VS-44HDCP
19
19
7.2.1
Connecting the Ethernet Port Directly to a PC
You can connect the Ethernet port of the
VS-44HDCP
directly to the Ethernet port
on your PC using a crossover cable with RJ-45 connectors.
This type of connection is recommended for identifying the
VS-44HDCP
with the factory configured default IP address.
7.2.2
Connecting the Ethernet Port via a Network Hub or Switch
You can connect the Ethernet port of the
VS-44HDCP
to the Ethernet port on a
network hub or using a straight-through cable with RJ-45 connectors.
7.3
Using the IR Transmitter
You can use the
RC IR3
IR transmitter to control the machine via the built-in IR
receiver on the front panel or, instead, via an optional external IR receiver (Model:
C-A35M/IRR-50). The external IR receiver can be located up to 15 meters away
from the machine. This distance can be extended to up to 60 meters when used
with three extension cables (Model: C-A35M/A35F-50).
Before using the external IR receiver, be sure to arrange for your Kramer dealer to
insert the internal IR connection cable (P/N: 505-70434010-S) with the 3.5mm
connector that fits into the REMOTE IR opening on the rear panel. Connect the
external IR receiver to the REMOTE IR 3.5mm connector.
7.4
Firmware Upgrade
For instructions on upgrading the firmware see “
Upgrading the
VS-44HDCP
Firmware Using the STC Software
”.
i
Summary of Contents for VS-44HDCP
Page 2: ......
Page 13: ...10 VS 44HDCP Connecting the VS 44HDCP Figure 3 Connecting to the VS 44HDCP Rear Panel ...
Page 48: ......