![background image](http://html.mh-extra.com/html/kramer/vs-44hdcp/vs-44hdcp_user-manual_2001359016.webp)
VS-44HDCP - Operating the VS-44HDCP 4x4 DVI Matrix Switcher
13
13
6.4
Changing the Port Switching Speed
The switching speed can be set per port to any of the following:
3
—Normal (default)
2
—Fast
1
—Extra fast
To change the port switching speed
:
1. Ensure that the device is in normal switching mode, (that is, not Store,
Recall or EDID mode).
2. Press the RCL and EDID buttons at the same time.
The RCL and EDID buttons flash, and the display indicates the switching
speed mode of each port.
IN 1, IN 2 and IN 3 are illuminated (red).
3. Press one or more (or ALL) of the OUT buttons to select the port to change.
The selected port setting on the LED display flashes.
4. Press one of the IN 1/IN 2/IN 3 button to toggle the switching speed, (to Extra
fast/Fast/Normal, respectively).
The switching speed displayed changes for the selected ports.
5. Press the LOCK button to confirm the change.
The switching speed for the selected port is changed and the device reverts
to the normal switching mode.
Note
: If the LOCK button is not pressed within about 12 seconds, the device exits
the port speed switching mode automatically and all changes are lost.
6.5
Setting HDCP to On/Off
HDCP support can be enabled (On) or disabled (Off) for each of the HDMI inputs,
allowing the source to transmit a non-HDCP signal if required (for example, when
working with a Mac computer)
To set the HDCP:
Summary of Contents for VS-44HDCP
Page 2: ......
Page 13: ...10 VS 44HDCP Connecting the VS 44HDCP Figure 3 Connecting to the VS 44HDCP Rear Panel ...
Page 48: ......