![background image](http://html.mh-extra.com/html/kramer/vs-42hdcp/vs-42hdcp_user-manual_2001338034.webp)
VS-42HDCP - Protocol 3000
31
31
Command -
GEDID
Command Type - System
Command Name
Permission
Transparency
Get:
GEDID
End User
Public
Description
Syntax
Get:
Read EDID data
#
GEDID
␠
eeprom_id
␍
Response
Multi line response:
~nn@
GEDID
␠
eeprom_id,size
␍␊
EDID_data
␍␊
~nn@
GEDID
␠
eeprom_id
␠
OK
␍␊
Parameters
eeprom_id
– EEPROM to get the EDID from
size
–
Device sends this parameter in response. Size of EDID that will print.
edid_data
–
EDID data as stream of bytes.
Response Triggers
Response is sent to the com port from which the Set (before execution) / Get command was received
Notes
For Get, size=0 means EDID is not supported
For old devices that do not support this command, ~nn@ ERR 002
␍␊
is received
Command
–
GEDID-EXT
Command Type - Common
Command Name
Permission
Transparency
Get:
GEDID-EXT
End User
Public
Description
Syntax
Get:
Read EDID from external device
connected to output
#
GEDID-EXT
␠
out_id
␍
Response
Multi line response:
~nn@
GEDID-EXT
␠
out_id,size
␍␊
EDID_data
␍␊
~nn@
GEDID-EXT
␠
out_id
␠
OK
␍␊
Parameters
out_id
– EEPROM to get the EDID from
size
–
Device sends this parameter in response. Size of EDID that will print.
edid_data
–
EDID data as stream of bytes.
Summary of Contents for VS-42HDCP
Page 2: ......
Page 13: ...10 VS 42HDCP Connecting the VS 42HDCP Figure 3 Connecting to the VS 42HDCP Rear Panel ...
Page 46: ......