Kramer VS-42HDCP, User Manual

Page: 14 / 47

VS-42HDCP - Operating the VS-42HDCP 4x2 DVI Matrix Switcher 11
11
6 Operating the VS-42HDCP 4x2 DVI Matrix
Switcher
This section describes how to:

Switch inputs to outputs (see Section
6.1
)

Disconnect outputs (see Section
6.2
)

Store and recall a setup (see Section
6.3
)

Change the port switching speed (see Section
6.4
)

Set HDCP on or off (see Section
6.5
)

Lock and unlock the front panel (see Section
6.6
)

Switch between protocol 2000 and protocol 3000 (see Section
6.7
)

Acquire the EDID (see Section
6.8
)

Reset the Ethernet configuration to default values (see Section
6.9
)
6.1 Routing Inputs to Outputs
To route an input to an output:

Press an INPUT button (from 1 to 4) in the TO OUTPUT 1 row to select an
input to switch to output 1

Press an INPUT button (from 1 to 4) in the TO OUTPUT 2 row to select an
input to switch to output 2
6.2 Disconnecting the Outputs
To disconnect output 1, press the OFF button on the TO OUTPUT 1 line and to
disconnect output 2, press the OFF button on the TO OUTPUT 2 line. The OFF
button illuminates.