Kramer VS-42HDCP, User Manual

Page: 16 / 47

VS-42HDCP - Operating the VS-42HDCP 4x2 DVI Matrix Switcher 13
13
6.4 Changing the Port Switching Speed
The switching speed can be set for both output ports to any of the following:

Extra fast

Fast

Normal
To change the port switching speed :
1. Turn the power off.
2. To set the
output ports’ switching speed to:

Ex-fast, press the INPUT 1 (of the TO OUTPUT 1 selector buttons)
and LOCK buttons while turning the power on

Fast, press the INPUT 2 (of the TO OUTPUT 1 selector buttons) and
LOCK buttons while turning the power on

Normal, INPUT 3 (of the TO OUTPUT 1 selector buttons) and LOCK
buttons while turning the power on
Note : If the EDID button is not pressed within about 12 seconds, the device exits
the port speed switching mode automatically and all changes are lost.
6.5 Setting HDCP to On/Off
HDCP support can be enabled (On) or disabled (Off) for each of the HDMI inputs,
allowing the source to transmit a non-HDCP signal if required (for example, when
working with a Mac computer)
To set the HDCP:
1. Turn the power off on the machine.
2. Press and hold the IN 1, IN 2 and LOCK buttons simultaneously and turn the
power on while pressing these buttons (you will need more than one person
to perform this step).
The machine is set to the HDCP enable/disable mode.