VS-3232DN - Using the Configuration Menus
37
6. To select the next parameter press the right arrow button (see
Section 10
available parameters).
Or:
7. To enter the selected parameter press TAKE.
The parameter options are displayed.
8. Select the required action or number using the keypad numbers and arrows.
9. Press TAKE to save the change.
The parameter change is not implemented on the system until you
press TAKE.
10. Repeat from Step 6 to modify additional parameters.
11. Do one of the following:
•
Press BREAKAWAY to exit the Config Menu.
•
Wait approximately 15 seconds for the operation to time out.
•
Press MENU to exit to the parameter list.
7.2.3
Config Menu—Output Load Detection Display
This option displays a list of outputs and indicates which have loads attached to
them.
To display a list of outputs and attached loads:
1. Press MENU twice.
The following message is displayed:
start configuration menu
MENU to view setup ENT to change them
2. Press MENU until the following is displayed:
OUT:
01 02 03 04 05 06 07 08 09 10 11
LOAD: Y
X
Y
Y
Y
Y
X
Y
Y
Y
X
